FACULTY PUBLICATIONS

Journals:

2017-2018

    1. Sivakumar, V., Donohue, S., Henderson, L. and Nanda, S. (2018). “Behaviour of normally consolidated clay containing isolated solid inclusions” Geotechnical Engineering, (Accepted).
    2. Chakraborty, P. and Sarkar, A. (2018). Study of flow characteristics within randomly distributed submerged rigid vegetation. Journal of Hydrodynamics (Accepted).
    3. Sharma, V., Irmak, S. and Padhi, J. (2018). “Effects of Cover Crops on Soil Quality: Part II. Soil Exchangable Bases (K, Mg, Na, Ca), Cation Exchange Capacity and Soil Micronutrients (Zn, Mn, Fe, Cu, B)”. Journal of Soil and Water Conservation. P-ISSN: 0022-4561, E-ISSN: 1941-3300. (Accepted)
    4. Athani, S. S., Solanki, C. H., Mohapatro, B. G. and Dodagoudar, G. R. (2017). “Strains induced around cutoff walls of earth dam under full reservoir and drawdown conditions”.Lowland Technology International (International Association of Lowland Technology).18 (4), pp 297-304. 2017. ISSN: 1344-9656.
    5. Banerjee, S. K. and Chakraborty, D. (2017). “Influence of undercut and surface crack on the stability of a vertical escarpment”. Geomechanics and Engineering. 12(6),pp.965-981, SJR- 0.417, CS-1.18. 2017. P-ISSN: 2005-307X, E-ISSN: 2092-6219.
    6. Nanda, S., Sivakumar, V., Donohue, S., Graham, S. (2017). “Small strain behavior and crushability of Ballyconnelly carbonate sand under monotonic and cyclic loading”, Canadian Geotechnical Journa, (https:\/\/civil.kiit.ac.in//doi.org/10.1139/cgj-2016-0522).
    7. Roy, M., Moulick, S. and Mal, B. C. (2017). “Design Characteristics of Spiral Aerator”. Journal of world aquaculture society (Wiley). 48(6), pp 898-908. 2017. SJR-0.504, CS-1.15. E-ISSN: 1749-7345.
    8. Panda, S. S. and Gangulu, A. R. (2017). “Study of dowel action in reinforced concrete beam by factorial design of experiment”. ACI Structural Journal. 114(06), pp. 1495-1505. 2017. SJR-1.272, CS-1.39. ISSN: 0889-3241.
    9. Nanda, S., Sivakumar, V., Hoyer, P., Gavin, K., Bradshaw, A. and Gilbert,B. “Effects of Strain Rates on the Undrained Shear Strength of Kaolin”Geotechnical Testing Journal (ASTM), 40(6),1-12 (https:\/\/civil.kiit.ac.in//doi.org/10.1520/GTJ20160101)
    10. Banerjee, S. K. and Chakraborty, D. (2017). “Stability of long circular tunnels in sloping ground”. Geomechanics and Geoengineering. P 1-11. 2017. SJR-0.585, CS-0.92. ISSN: 1748-6025.
    11. Bhowmik, K. and Saha, P. (2017). “Seismic response control of benchmark highway bridge using passive hybrid control systems”. International Journal of Materials and Structural Integrity. 11(4)- pp 155-174. 2017. P-ISSN: 1745-0055, E-ISSN: 1745-0063.
    12. Saha, A., Saha, P. and Patro, S.K. (2017). “Polynomial friction pendulum isolators (PFPIs) for seismic performance control of benchmark highway bridge”. Earthquake Engineering and Engineering Vibration. 16(4), PP 827-840. 2017. SJR-0.367, CS-0.59. P-ISSN: 1671-3664, E-ISSN- 1993-503X.
    13. Ray, L.I.P., Mal, B.C. and Moulick, S. (2017). “Nutrient modeling for a semi-intensive IMC pond: An MS-Excel approach”. Water Science and Technology. 76(10), pp 2858-2866. 2017. ISSN: 0273-1223.
    14. Prusty. J. K., Patro, S. K. and Mohanty, T. (2017). “Structural behaviour of reinforced concrete beams made with ferrochrome slag as coarse aggregate”. KSCE journal of civil engineering (Springer). 22 (2), pp 696-707. 2018. SJR – 0.349, CS – 0.9.
    15. Ghosh, B. and Rath,A. K.., “Fly-Ash Pellets: A Replacement of Coarse Aggregate”. International Journal of Technical Research and Applications. 5(2), pp 03-07, 2017. E-ISSN 2320–8163, P-ISSN 2321-7332.
    16. Sahoo, K. K., Davis, R. and Sarkar, P., “Mechanical Properties of Silica Fume Concrete Designed as per Construction Practice”. Construction Materials, Proceeding of Institution of Civil engineers (ICE). pp 01-09. 2017. P-ISSN: 1747-650X, E-ISSN: 1747-6518.
    17. Jena, B., Mohanty, B. B. and Sahoo, K. K., “Comparative Study of Self Compacting Concrete Reinforced with Different Chopped Fibers”. Construction Materials, Proceeding of Institution of Civil engineers (ICE). pp 01-13. 2017. P-ISSN: 1747-650X, E-ISSN: 1747-6518.
    18. Sunny, A. and Rashmishree, K. N., “Study on Leachate Management In Municipal Solid Waste Management System”. International Education & Research Journal [IERJ].3(06), pp 01-02. 2017. E-ISSN: 2454-9916.
    19. Nayak, K. C., Bera, D. K. and Rath, A. K., “Bendable Concrete – A New Approach to the Construction Industry”. International Journal of Emerging Technology and Advanced Engineering. 07 (SI2), pp. 158-162. 2017. E-ISSN: 2250–2459.
    20. Rath, A., Samantaray, P., Bera, D. K. and Rath, A. K., “Review of Geopolymer Pervious Concrete”. International Journal of Emerging Technology and Advanced Engineering. 07 (SI2), pp. 298-304. 2017. E-ISSN: 2250–2459.
    21. Singh, V. and Mohapatra, B. G., “Various methods of retrofitting of R.C.C structures and Masonry structures – A Review”. International Journal of Emerging Technology and Advanced Engineering. 07 (SI2), pp. 127-136. 2017. E-ISSN: 2250–2459.
    22. Roy, C., Chaterjee, P. and Bera, D. K., “Performance of Self Compacting Concrete by Using of Nano Silica- A Review”. International Journal of Emerging Technology and Advanced Engineering. 07 (SI2), pp. 106-117. 2017. E-ISSN: 2250–2459.
    23. Sarkhel, S., Padhi, J. and Dash, A. K., “Seismic Analysis of Concrete Gravity Dam Considering Hydrodynamic Effect and Soil-Structure Interaction”. International Journal of Emerging Technology and Advanced Engineering. 07 (SI2), pp. 277-284. 2017. E-ISSN: 2250–2459.
    24. Kamruddin, S. K., Das, S. and Saha, P., “Efficiency of different Delay Analysis Methods Used in Construction Projects: A Review”. International Journal of Emerging Technology and Advanced Engineering. 07 (SI2), pp. 47-57. 2017. E-ISSN: 2250–2459.
    25. Ghosh, S., Mohanty, I. and Saha, P., “Contribution of Steel Slags on the Fresh and Harden Properties of Concrete – A Review”. International Journal of Emerging Technology and Advanced Engineering. 07 (SI2), pp. 58-67. 2017. E-ISSN: 2250–2459.
    26. Kumar, A., Mohanty, T. and Saha, P., “Effect of Industrial Waste as Supplementary Material on Properties of Geopolymer Concrete”. International Journal of Emerging Technology and Advanced Engineering. 07 (SI2), pp. 68-75. 2017. E-ISSN: 2250–2459.
    27. Khan, A. M., Mohanty, T. and Saha, P., “Ferrochrome Waste as a Supplementary Material in Sustainable Concrete”. International Journal of Emerging Technology and Advanced Engineering. 07 (SI2), pp. 76-82. 2017. E-ISSN: 2250–2459.
    28. Mahapatra, S., Pani, A. K. and Saha, P., “Use of Industrial Waste for Sustainable Concrete Block Pavement”. International Journal of Emerging Technology and Advanced Engineering. 07 (SI2), pp. 96-105. 2017. E-ISSN: 2250–2459.
    29. Padhi, A. K., Pani, A. K. and Saha, P., “Review paper on Effect of Block Shapes, Size and Construction Patterns on Proporties of Concrete Block Pavements”. International Journal of Emerging Technology and Advanced Engineering. 07 (SI2), pp. 305-311. 2017. E-ISSN: 2250–2459.
    30. Rahman, K., Saha, P., Panda, S. S. and Jena, B., “Effect of Openings on Flexural Behavior of Reinforced Concrete Beams”. International Journal of Emerging Technology and Advanced Engineering. 07 (SI2), pp. 383-389. 2017. E-ISSN: 2250–2459.
    31. Patra, B. N., Sharma, A. K. and Saha, P., “Durability Properties of Self Compacting Concrete using Silica Fume: A Review”. International Journal of Emerging Technology and Advanced Engineering. 07 (SI2), pp. 422-430. 2017. E-ISSN: 2250–2459.
    32. Rout, L., Ghosh, S. and Saha, P., “Retro

tressed Concrete Bridge Girder: A Review”. International Journal of Emerging Technology and Advanced Engineering. 07 (SI2), pp. 451-458. 2017. E-ISSN: 2250–2459.

  1. Behera, S. K., Dhal, K. K. and Sahoo, K. K., “Mechanical Properties Assessment of Self-Compacting Concrete: Review”. International Journal of Emerging Technology and Advanced Engineering. 07 (SI2), pp. 145-152. 2017. E-ISSN: 2250–2459.
  2. Dhal, K. K., Behara, S. K., Sahoo, K. K. and Biswal, M., “Studies on Self Compacted Concrete Made of From Glass Fiber: Review”. International Journal of Emerging Technology and Advanced Engineering. 07 (SI2), pp. 153-157. 2017. E-ISSN: 2250–2459.
  3. Das, S. and Chakraborty, A., “Comparison of Seismic Performance of Unbonded Braced and SMA Braced Frames”. International Journal of Emerging Technology and Advanced Engineering. 07 (SI2), pp. 118-126. 2017. E-ISSN: 2250–2459.
  4. Rathod, N. G. and Saha, P., “Effect of nano-SiO2 on physical and electrical properties of PPC cement using complex impedance spectroscopy”. Materials Today: Proceedings. 5(1), PP 193-199. 2018. SJR- 0.387, CS-0.43.

2016-2017

    1. Saha, P. and Jangid, R. S., “Seismic control of benchmark cable-stayed bridge using variable sliding isolators”. Journal of Structural Engineering(Madras). 43, PP 69-90. 2016. ISSN: 0970-0137.
    2. Banerjee, S. and Patro, S. K., “Inelastic Seismic Response of Building with Friction Damper”. Journal of The Institution of Engineers (India): Series A. 97(4), pp 395-404. 2016. P-ISSN: 2250-2149, E-ISSN: 2250-2157.
    3. Bhuyan, M. K., Jena, J. and Bhuyan, P. K., “At-site flood analysis using exponential and generalized logistic models in partial duration series (PDS)”. International Journal of Engineering and Technology (IJET). 18(1), PP 501-514. 2016. SJR-0.179, CS-0.42. P-ISSN: 2319-8613, E-ISSN: 0975-4024.
    4. Bhuyan, M. K., Mohanty, S., Jena, J. and Bhuyan, P. K., “Hydrologic analysis for river diversion scheme of Kanupur project, Odisha – A case study”. Water and Energy International. 58(11), PP 52-57. 2016. SJR-0.123, CS-0.01. P-ISSN: 0974-4207, E-ISSN: 0974-4711.
    5. Dash, M. K., Patro, S. K. and Rath, A. K., “Sustainable use of industrial-waste as partial replacement of fine aggregate for preparation of concrete – A review”. International journal of sustainable Built environment (Elsevier). 5 (2), pp 484-516. 2016. SJR-0.215, CS-0.59. ISSN: 2212-6090.
    6. Acharya, P. K., Patro, S. K. and Moharana, N. C., “Effect of Lime on Mechanical and Durability Properties of Blended Cement Based Concrete”. Journal of the Institution of Engineers (India): Series A. 97 (2), PP 71-79. 2016. P-ISSN: 2250-2149, E-ISSN: 2250-2157.
    7. Bag, N., Moulick, S. and Mal, B. C., “Effect of stocking density on water and soil quality, growth, production and profitability of farming Indian major carps”. Indian Journal of Fisheries. 63(3), pp 39-49. 2016. SJR-0.134, CS-0.46. ISSN: 0970-6011.
    8. Acharya, P. K. and Patro, S. K., “Strength, sorption and abrasion characteristics of concrete using ferrochrome ash (FCA) and lime as partial r

eplacement of cement”. Cement and Concrete Composities. 74 (1), pp16-25. 2016. SJR-2.758, CS-4.96. ISSN: 0958-9465.

  1. Acharya, P. K. and Patro, S. K., “Use of ferrochrome ash (FCA) and lime dust in concrete preparation”. Journal of Cleaner Production. Vol. 131, pp 237-246. 2016. SJR-1.615, CS-5.83. ISSN: 0959-6526.
  2. Roy, S., Mishra, H.and Mohapatro, B. G., “Creating sustainable environment using smart materials in smart structures”. Indian Journal of Science and Technology. 9(30), pp 1-9. 2016. SJR-0.251, CS-0.76. P-ISSN: 0974-6846 E- ISSN: 0974-5645.
  3. Das, S., Saha, P. and Patro, S. K., “Vibration-based damage detection techniques used for health monitoring of structures: A review”. Journal of Civil Structural Health Monitoring. 6(3), PP 477-507. 2016. SJR-0.382, CS-1.28. P-ISSN: 2190-5452, E-ISSN: 2190-5479.
  4. Ghosh, S. K. and Bera, D. K., “Fundamental Properties of Self-Compacting Concrete Utilizing Waste Rubber Tires – A Review”. International Journal of Research in Engineering and Technology (IJRET). 5(1), pp 254-261. 2016. P-ISSN: 2321-7308, E-ISSN: 2319-1163.
  5. Moharana, N. C. and Panda, B. C., “Assessment of corrosion initiation time on costal concrete structures – A case study”. International Journal of Research in Engineering and Technology. 5 (10), pp 216-224. 2016. P-ISSN: 2321-7308, E-ISSN: 2319-1163.
  6. Khuntia, A., Mohanty, T. C. and Bera, D. K., “Effect of Mineral Admixtures on Durability of High Strength Concrete”. Journal of Advanced Research in Construction and Architectural Engineering. 1(3), pp 1-12. 2016.
  7. Biswal, M., Sahu, S. K., Asha, A. V. and Nanda, N., “Hygrothermal effects on buckling of composite shell-experimental and FEM results”. Steel and Composite Structures. 22(6), pp 1445-1463. 2016.SJR-0.843, CS-2.92. ISSN: 1229-9367, E-ISSN: 1598-6233.
  8. Sahoo. K. K., Sathyan, A, Sarkar, P. and Davis, R., “Improvement of the mechanical properties of Mortar and Concrete using Ureolytic Bacteria”. Construction Materials, Proceeding of Institution of Civil engineers (ICE). 2016. P-ISSN: 1747-650X, E-ISSN: 1747-6518.
  9. Prusty, J. K. and Patro, S. K., “Concfete using agro-waste as fine aggregate for sustainable built environment – A review”. International Journal of Sustainable Built Environment. 3 (2), pp 512-533. 2016. SJR-0.215, CS-0.59. ISSN: 2212-6090.
  10. Banerjee, S., “Structural Economics and Dynamics Effect of Multistory Building”. Journal of Structural Technology. 1(2), PP 1-7. 2016.

2015-2016

  1. Das S., and Saha P., Vibration-based Damage Detection Techniques used for Health Monitoring of Structures – A Review. Journal of Civil Structural Health Monitoring, published online. 2016. ISSN: 2190-5479. H-7, SJR-0.296,
  2. Acharya P, Patro, S.K. and Moharana N.C, “Effect of lime on mechanical and durability properties of blended cement based concrete”. Journal of Institution of Engineers India (series A). 97(2), pp. 71-79. 2016 .ISSN: 2250-2149.
  3. Saha A, Saha P. and Patro, S.K., “Polynomial Friction Pendulum isolators(PFPI) for seismic performance control of Benchmark Highway bridge”. Earthquake Engineering and Engineering vibration. accepted for publication. 2016 .ISSN:1671-3664. H-24, SJR-.35,C- .44
  4. Roy S., Mishra H and Mohapatra B G., Creating sustainable environment using smart materials in smart structures. Indian Journal of Science and Technology, accepted for publication. 2016. ISSN: 0974-5645. H-18, SJR-1.302, C-1.047
  5. Bhuyan, M.K., Jena, J., and Bhunya, P.K., At-site flood analysis using exponential and generalized logistic models in partial duration series (PDS). International Journal of Engineering and Technology (IJET), 18(1), pp. 501-514. 2016. ISSN 0975-4024. H-8, SJR-.175, C-.362
  6. Bhuyan, M.K., Mohanty, S., Jena, J., and Bhunya, P.K., Hydrologic analysis for river diversion scheme of Kanupur project, Odisha – A case study. Water and Energy International, 58(11), pp. 52-57. 2016. ISSN 0974-4711.
  7. Saha P., and Jangid R. S., Seismic control of benchmark cable-stayed bridge using variable sliding isolators. Journal of Structural Engineering, 43, pp. 69-90. 2016. ISSN 0970-0137.H-8, SJR-0.13, C-0.051
  8. Banerjee S. K., and Chakraborty D., Seismic stability of a long unlined circular tunnel in sloping ground. Canadian Geotechnical Journal, published online. 2016. ISSN: 1208-6010. H-69, SJR-1.808, C-1.972
  9. Samal, S.R., Santosh, C. J., Santhakumar, M.S., Evaluation of Traffic congestion Impacts Under Indian Conditions – A Case Study of Trichy Roads. International Journal of Applied Engineering Research, 10 (62), 350 – 355, 2015. ISSN: 0973-4562. H-5, SJR-.13, C-.12
  10. Roy S. M., Moulick S., Mukherjee C. K., and Mal B. C., Effect of Rotational Speeds of Paddle Wheel Aerator on Aerator Cost. American Research Thoughts. 2(1), pp. 3069-3087. 2015. ISSN 2392-876X.
  11. Saha, A., Saha P. and Patro, S.K. Seismic response control of benchmark highway bridge using non-linear FV spring damper. The IES Journal Part A: Civil & Structural Engineering, Taylor & Francis. 8(4), pp. 240-250. 2015. ISSN 1937-3260. H-5, SJR-.219, C-.229
  12. Acharya P. K., and Patro, S. K., Effect of lime and ferrochrome ash (FA) as partial replacement of cement on strength, ultrasonic pulse velocity and permeability of concrete. Construction and Building Materials, Elsevier. 94, pp. 448-457. 2015. ISSN 0950-0618. H-70, SJR-1.486, C-2.769
  13. 13.Padhi, J. and Misra, R.K. Potential of thermal imaging as an irrigation scheduling technique for wheat crop. International Journal of Earth Sciences and Engineering. 8(2), pp. 547-551. 2015. ISSN 0974-5904. H-4, SJR-.168, C-.104
  14. 14.Bera D. K., Rath A. K., and Parashar S. K. S., Influence of Micro/Nano Sized Fly Ash on the Properties of Cement Mortar, International Journal of Engineering Research and Technology (IJERT), 4(9), pp. 865-869. 2015. ISSN 2278-0181.
  15. 15.Shahoo S., Das B. B., Rath A. K., and Kar B. B., Acid, Alkali and Chloride Resistance of High Volume Fly Ash Concrete, Indian Journal of Science and Technology, 8(19), pp. 1-12. 2015. ISSN 0974-5645. H-18, SJR-1.302, C-1.047
  16. 16.Dhar D., and Jose A., An overview of effectiveness and environmental impact of green building. International Journal of Engineering Science and Management (IJESM), 1(2), pp. 115-119. 2015. ISSN 2454-4140.
  17. 17.Ghosh S. K., and Bera D. K., Fundamental Properties of Self-Compacting Concrete Utilizing Waste Rubber Tires – A Review, International Journal of Research in Engineering and Technology (IJRET), 4(13), pp. 254-261. 2016. ISSN 2319-1163.
  18. 18.Verma S., Choudhury M. and Saha P., Blast Resistant Design of Structure, International Journal of Research in Engineering and Technology (IJRET), 4(13), pp. 64-69. 2015. ISSN 2319-1163.
  19. 19.Das O., Bera P. and Moulick S., Water Conservation Aspects of Green Buildings, International Journal of Research in Engineering and Technology (IJRET), 4(13), pp. 75-79. 2015. ISSN 2319-1163.
  20. 20.Tarafder N., Bhowmik K., and Naveen K. V., Earthquake Resistant Techniques and Analysis of Tall Buildings, International Journal of Research in Engineering and Technology (IJRET), 4(13), pp. 99-104. 2015. ISSN 2319-1163.
  21. 21.Ghosh S. K., Chaudhury A., Datta R., and Bera D. K., A Review of Performance of Pervious Concrete Using Waste Materials, International Journal of Research in Engineering and Technology (IJRET), 4(13), pp. 105-115. 2015. ISSN 2319-1163.
  22. 22.Dey R., and Saha P., Review of the Performance of the Control Strategies Used for Smart Benchmark Base Isolated Building, International Journal of Research in Engineering and Technology (IJRET), 4(13), pp. 133-143. 2015. ISSN 2319-1163.
  23. 23.Singh S., Ahmad F., and Paikaray B., Effects of Earthquake on Foundations, International Journal of Research in Engineering and Technology (IJRET), 4(13), pp. 168-176. 2015. ISSN 2319-1163.
  24. 24.Dhar S., Das S., and Saha P., State-of-the-Art Review of Shape Memory Alloy Used in Civil Structures as Seismic Control Device, International Journal of Research in Engineering and Technology (IJRET), 4(13), pp. 195-203. 2015. ISSN 2319-1163.
  25. 25.Goyal Y., Kumar S., and Sahu S., Analysis Techniques and Performance of RCC Polymer Composites, International Journal of Research in Engineering and Technology (IJRET), 4(13), pp. 320-326. 2015. ISSN 2319-1163.
  26. 26.Rathod N. G., and Moharana N. C., Advanced Methods of Corrosion Monitoring–A Review, International Journal of Research in Engineering and Technology (IJRET), 4(13), pp. 413-420. 2015. ISSN 2319-1163.
  27. 27.Jasvi A. H., and Bera D. K., Sustainable Use of Low Cost Building Materials in Rural India, International Journal of Research in Engineering and Technology (IJRET), 4(13), pp. 534-547. 2015. ISSN 2319-1163.

2014-15

  1. Prusty, J.K. and Patro, S. K. Properties of Fresh and Hardened Concrete using Agro-waste as Partial Replacement of Coarse Aggregate – A Review. Construction and Building Materials, Elsevier. 82, pp. 101-113. 2015. ISSN 0950-0618. H-70, SJR-1.486, C-2.769
  2. Pattanaik, S.C., Gopalkrishnan, E. and Patro, S.K. A Study of deterioration of Reinforced Cement Concrete Structures in Mumbai. Indian Concrete Journal. 2015. ISSN 0019-4565.
  3. Sahu, S. K., Yoshit P. and Saha P., Greywater: Characterization & Utilization in Green Buildings. Journal of Energy Research and Environmental Technology, 2 (2), 83-87. 2015. ISSN 2394-1561.
  4. Banerjee, L., Biswas, S., Bhandari, G. and Sahu, R.B., 2015. Ground Improvement of Soft Clay Bed Using Geocell Mattress at Foundation of an Earthen Embankment. Indian Journal of Geosynthetics and Ground Improvement (IJGGI), 4(2), pp. 18 – 22. 2015.
  5. Rathod N. G., and Saha P., Diagrid – An Innovative Technique for High Rise Structure, International Journal of Civil Engineering and Environmental Technology, 2(5), pp. 394-399. 2015. ISSN 2349-8404.
  6. Dey A., Bhattacharjee U., Sagar V., Utkarsh and Saha P., Pushover Analysis for Multistory Building, International Journal of Civil Engineering and Environmental Technology, 2(5), pp. 400-405. 2015. ISSN 2349-8404.
  7. Bhuyan, M.K., Kumar, S., Jena, J., and Bhunya, P.K., Flood Hydrograph with Synthetic Unit Hydrograph Routing. Water Resources Management, Springer, 29(15), pp. 5765-5782. 2015. ISSN 1573-1650. H-54, SJR-1.259, C-2.905
  8. Bhunya, P.K., Adeloye, A.J., Bhuyan, M.K. and Mohanty, S.K., 2015. Climate Change Pattern and its Effect on Hydrologic Cycle: A Review. Water Resources Management, Springer, Manuscript Number, WARM-D-14-01186 (In press).
  9. Misra, R.K. and Padhi, J. Assessing field-scale soil water distribution with electromagnetic induction method. Journal of Hydrology. 516, pp. 200-209. 2014. ISSN 0022-1694. H-135, SJR-1.466, C-3.165
  10. Mandal, K. G., Padhi, J., Kumar, A., Ghosh, S., Panda, D. K., Mohanty, R.K. and Roychaudhuri, M. Analysis of rainfall using probability distribution and Markov chain models for crop planning in Daspalla region in Odisha, India. Theoritical and Applied Climatology. 121 (3-4), pp. 517-528. 2014. ISSN 1434-4483. H-57, SJR-.859, C-1.716
  11. Reddy, N.S.C., Dewaikar, D.M. and Mohapatra, B.G. Computation of passive pressure coefficients for a horizontal cohesionless backfill with surcharge using method of slices. International Journal of Geotechnical Engineering. 8(4), pp. 463-468. 2014. ISSN 1939-7879.
  12. Reddy, N.S.C., Dewaikar, D.M. and Mohapatra, B.G. Computation of passive pressure coefficients for a Inclined cohesion less backfill using the method of slices. International Journal of Advances in Engineering and Emerging Technology (IJAEET). 5(3), pp. 137-147. 2014. ISSN 2321-452X.
  13. Ray, L.I.P., Moulick, S., Mal, B.C., Senthilvel, S. and Natrajan, P. A case study on water balance using rooftop rainwater. Journal of Progressive Agriculture. 5(1), pp. 75-78. 2014. ISSN 2278-0556.
  14. Bhunya, P.K., Adeloye, A.J., Bhuyan, M.K. and Jena, J.A. Simple Non-Linear RainfallRunoff Model for Small Catchments. AGU International Journal of Science and Technology. 1, pp. 1-24. 2015. ISSN 2455-0493.

 Book Chapter

2017-2018

  1. Dey, R. and Saha, P. (2018). Seismic response control of smart base isolated benchmark building using hybrid conttrol strategy (visscous fluid damper with MR damper). Recent Advances in Structural Engineering: Vol. II.Springer Pub.
  2. Shah, R. and Mohanty, T. (2018). Combined effect of steel fibers with ferrochrome slag on hardened concrete. Recent Advances in Structural Engineering: Vol. I. Springer Pub.
  3. Udgata, G. and Rath, A. K. (2018). Effects of steel fibre on self compacting concrete with fly ash. Recent Advances in Structural Engineering: Vol. I. Springer Pub.
  4. Sudarsan Rao A., Padhi J., Das B. (2018). Assessment of Drought in Balangir District of Odisha, India using Drought Indices. Climate Change Impact. Springer Pub.
  5. Pattnaik, A., Kumar, V. and Saha, P. (2018). Importance of Indoor Environmental Quality in Green Buildings. Environmental Pollution.Springer Pub.

2015-2016

  1. Saha P., Seismic Control of Benchmark Cable-Stayed Bridge Using Variable Friction Pendulum Isolator, Advances in Structural Engineering: Dynamics, Volume II, Springer, pp 1271-1282. 2015. ISBN: 978-81- 322-2193- 7.
  2. Swain S. S., and Patro S. K., Seismic Protection of Soft Storey Buildings Using Energy Dissipation Device, Advances in Structural Engineering: Dynamics, Volume II, Springer, pp 1311-1338. 2015. ISBN: 978-81- 322-2193- 7.
  3. Banerjee S., and Patro S. K., Inelastic Seismic Response of Building with Friction Damper, Advances in Structural Engineering: Modeling, Simulation and Analysis, Volume IV, Bloomsbury Publishing India Pvt. Ltd., pp 1311-1338. 2015. ISBN: 978-81- 322-2193- 7.

Conferences:

2017-2018

  1. Kundu, C.K. (2017). Non linear vibration of pre and post buckled composite shells under hygrothermal environment. International Conference on Theoretical, Applied, Computational and Experimental Mechanics 2017, IIT Kharagpur, 28-30 December 2017.
  2. Adhikari P. S., and Ghare A. D., Estimation of daily reference evapotranspiration using artificial neural network for Nagpur region. L.D. College of Engineering Ahmedabad, India, 21-23 December 2017.
  3. Samal S., and Das A. K., Evaluation of traffic parameters under heterogeneous traffic condition: A case study on Bhubaneswar city. 4th International conference of Transportation research group of India (4th CTRG 2017), IIT Bombay, 17-20 December 2017.
  4. Dutta J., Mishra A. K., and Das P., Influence of Salts on the Coefficient of Consolidation of Compacted Bentonites. Indian Geotechnical Conference 2017 GeoNEst, IIT Guwahati, India,14-16 December 2017.
  5. Nasreen N., and Khan A. K., Pullout Behavior of Model Helical Anchor in Cohesionless Deposit. Indian Geotechnical Conference 2017 GeoNEst, IIT Guwahati, India,14-16 December 2017.
  6. Nanda P., Sengupta I., and Singh S. P., Effect of Slenderness Ratio on the Behavior of Encased Stone Column. Indian Geotechnical Conference 2017 GeoNEst, IIT Guwahati, India,14-16 December 2017.
  7. Nanda P., and Singh S. P., Load carrying capacity of encased stone column embedded in compacted pond ash bed. 6th Indian Young Geotechnical Engineers Conference, NIT Trichy, 10-11 March 2017.
  8. Jose, A., “A Review on Suitability of Slope Stabilization Techniques Based On Case Studies On Various Methods Of Slope Stabilization”. 3rd international conference on sustainable energy and built environment. ASCE, India Section, Southern Region, VIT university chapter, School of civil and chemical engineering, VIT University, Vellore. 17th March 2017.
  9. Roy, S. and Saha, P. (2017). Seismic response control of smart structures using SMA Damper. 13th International Conference on Vibration Problems 2017, IIT Guwahati, 29th November to 2nd December 2017.
  10. Saha, A. and Saha, P. (2017). Seismic response control of benchmark highway bridge using semi active hybrid control system. 13th International Conference on Vibration Problems 2017, IIT Guwahati, 29th November to 2nd December 2017.
  11. Dey, R. and Saha, P. (2017). Effectiveness of different dynamic models of MR damper used in smart base isolated benchmark building. 13th International Conference on Vibration Problems 2017, IIT Guwahati, 29th November to 2nd December 2017.

2016-2017

  1. Rao A. S., Padhi J., and Das B., “Assessment of Drought in Balangir District of Odisha, India using Drought Indices”. International Conference on Water, Environment, Energy and Society. 15th-18th March, 2016.
  2. Moharana, N. C., “Effect of nano-SiO2 on physical and electrical properties of PPC cement using complex impedance spectroscopy”. International Conference on Processing of Materials, Minerals and Energy (PMME – 2016). Ongole, Andhra Pradesh, India. 29-30 July, 2016.
  3. Mohapatra, B. G., Bera P., and Mishra D., “Effect of Various Parameters on Slope Protection System – A Review”. International Conference on Recent Advances in Mechanics & Materials (ICRAMM-2016). Department of Civil Engineering, Veer Surendra Sai University of Technology, Burla Odisha. 17th-18thDecember, 2016.
  4. Rath, A. K., “Bamboo as a Green Building Material in Construction Industry- A review”. International Conference on Recent Advances in Mechanics & Materials (ICRAMM-2016). Department of Civil Engineering, Veer Surendra Sai University of Technology, Burla, Odisha. 17-18 December, 2016.
  5. Saha, P., and Dey R., “Innovative Control algorithms used in MR Damper”. International Conference on Recent Advances in Mechanics & Materials (ICRAMM-2016). Department of Civil Engineering, Veer Surendra Sai University of Technology, Burla, Odisha. 17-18 December, 2016.
  6. Choudhury M., Verma S., and Saha, P., “Effects of Earthquake On The Surrounding Environment: An Overview”., International Conference on Recent Advances in Mechanics & Materials (ICRAMM-2016). Department of Civil Engineering, Veer Surendra Sai University of Technology, Burla, Odisha. 17-18 December, 2016.
  7. Ansari M. S., Pareek K., Verma S., and Saha, P., “Seismic Retrofitting of the Structure: An Overview”., International Conference on Recent Advances in Mechanics & Materials (ICRAMM-2016). Department of Civil Engineering, Veer Surendra Sai University of Technology, Burla, Odisha. 17-18 December, 2016.
  8. Bhowmik K., and Saha, P., “Review of Control Strategies used for Seismic Control of Benchmark Highway Bridge”., International Conference on Recent Advances in Mechanics & Materials (ICRAMM-2016). Department of Civil Engineering, Veer Surendra Sai University of Technology, Burla, Odisha. 17-18 December, 2016.
  9. Kundu, C. K., “Vibration of Buckled Composite Shells Using Nonlinear Finite Element Method”. International Conference on Recent Advances in Mechanics & Materials (ICRAMM-2016). Department of Civil Engineering, Veer Surendra Sai University of Technology, Burla Odisha. 17-18 December, 2016.
  10. Rath, A. K., “Effects of steel fibre on self compacting concrete with fly ash”. Structural Engineering Convention (SEC 2016). CSIR, Chennai: SIGMA PUBLICATIONS. 21-23 December, 2016.
  11. Saha, P., “Damage identification in a multi-storeyed building using modal based health monitoring techniques”. Structural Engineering Convention (SEC 2016). CSIR, Chennai: SIGMA PUBLICATIONS. 21-23 December, 2016.
  12. Saha, P., “Seismic response control of smart base isolated benchmark building using hybrid conttrol strategy (visscous fluid damper with MR damper)”. Structural Engineering Convention (SEC 2016). CSIR, Chennai: SIGMA PUBLICATIONS. 21-23 December, 2016.
  13. Kundu, C. K., “Nonlinear dynamic analysis of hygro-thermo-elastic composite conical shell panels”. Structural Engineering Convention (SEC 2016). CSIR, Chennai: SIGMA PUBLICATIONS. 21-23 December, 2016.
  14. Kar S., and Kundu, C. K., “Effects of plastic hinge properties in nonlinear static pushover analysis on low-rise reinforced concrete buildings”. Structural Engineering Convention (SEC 2016). CSIR, Chennai: SIGMA PUBLICATIONS. 21-23 December, 2016.
  15. Sikder A., Bera, D. K., and Rath A. K., “Bamboo as a Green Building Material in Construction Industry- A review”. International Conference on Recent Advances in Mechanics & Materials (ICRAMM-2016). Department of Civil Engineering, Veer Surendra Sai University of Technology, Burla Odisha. 17-18 December, 2016.
  16. Pani, A. K., and Sanjay S. S., “Reduction of Shrinkage of Self Compacting Concrete Using Polycarboxylate Ether as Shrinkage Reducing Admixture”. International Conference on Recent Advances in Mechanics & Materials (ICRAMM-2016). Department of Civil Engineering, Veer Surendra Sai University of Technology, Burla Odisha. 17-18 December, 2016.
  17. Shah R., and Mohanty, T., “Combined effect of steel fibers with ferrochrome slag on hardened concrete”. Structural Engineering Convention (SEC 2016). CSIR, Chennai:SIGMA PUBLICATIONS. 21-23 December, 2016.
  18. Mohanty, T., and Jena A., “Strength Assessment and Feasibility Study on Waste Glass Powder as Partial Replacement of Cement in Concrete Production”. International Conference on Recent Advances in Mechanics & Materials (ICRAMM-2016). Department of Civil Engineering, Veer Surendra Sai University of Technology, Burla Odisha. 17-18 December, 2016.
  19. Udgata, G., and Rath A. K., “Effects of steel fibre on self compacting concrete with fly ash”. Structural Engineering Convention (SEC 2016). CSIR, Chennai:SIGMA PUBLICATIONS. 21-23 December, 2016.
  20. Banerjee, S., Patro S. K., and Mohapatra B. G., “Structural Economics of Earthquake Resistant RC Buildings on Sloping Ground Under Different Soil Conditions”. International Conference on Recent Advances in Mechanics & Materials (ICRAMM-2016). Department of Civil Engineering, Veer Surendra Sai University of Technology, Burla Odisha. 17-18 December, 2016.
  21. Rath, A. K., “Exciting Application of Nano Materials in Construction Industries – A Critical Review”. All India Seminar on Nano Material and Nano Composite Industries. KIIT and The Institution of Engineers (India), Bhubaneswar, Odisha. 29-30 January, 2016, pp 77-81.
  22. Bera, D. K., “Exciting Application of Nano Materials in Construction Industries – A Critical Review”. All India Seminar on Nano Material and Nano Composite (NMNC-2016). The Institution of Engineers (India), Orissa State Centre and Production Engineering Division Board (PRDB), Bhubaneswar. 29-30 January, 2016.
  23. Rath, A. K., “Geo-Polymerised Fly Ash Based Concrete – Overview”. All India Seminar on Advances in Construction Technology. The Institution of Engineers (India), Bhubaneswar, Odisha. 26th February 2016.
  24. Moulick, S., “Waste Stabilisation Pond”. International Conference on Waste Managent. Reasearch Group (WMRG) & Associaton of Civil Engineers (ACE), Department of Civil Engineering, IIT, Guwahati. 1-2 March, 2016.
  25. Mohanty, T., “Durability and case study of fibre reinforced polymer (FRP)”. 2nd International Conference on Sustainable Energy and Built Environment. VIT University. 10th-12thMarch, 2016.

2015-2016

  1. Mitra A., Anand T., Kar S., Shukla P. and Moulick S., Recycle 2016, International Conference on Waste Managent organised by Reasearch Group (WMRG) & Associaton of Civil Engineers (ACE), Department of Civil Engineering, Indian Institute of Technology, Guwahati, India, 1-2 March, 2016. pp 111-112.
  2. Swain R, Tarfder N and Mohanty, T., Durability and case study of fibre reinforced polymer (FRP). 2nd International Conference on Sustainable Energy and Built Environment, VIT University, Vellore. 10-12 March, 2016.
  3. Bera D. K., Rath A. K., Swapnadarshi S., and Parashar S. K. S., Exciting Application of Nano Materials in Construction Industries – A Critical Review. All India Seminar on Nano Material and Nano Composite (NMNC-2016), The Institution of Engineers (India), Orissa State Centre and Production Engineering Division Board (PRDB), Bhubaneswar. 29-30 January, 2016, pp 77-81.
  4. Sharma S., Rathi A. K., and Chakraborty A., Reliability Based Design of Nonlinear Composite Thin Plates, Proceedings of International Conference on Innovations in Structural Engineering (IC-ISE-2015), Department of Civil Engineering, University College of Engineering (A), Osmania University, Hyderabad, India, 14-16 December 2015. pp 583-598, ISBN: 978-81-7371-986-8.
  5. Mallick S., and Banerjee S., Strengthening of Reinforced Concrete Beams Using Fibre Reinforced Polymer Composites -A Review, Proceedings of International Conference on Innovations in Structural Engineering (IC-ISE-2015), Department of Civil Engineering, University College of Engineering (A), Osmania University, Hyderabad, India, 14-16 December 2015. pp 635-647, ISBN: 978-81-7371-986-8.
  6. Saurav Kar S., Sanjay S. S., and Pani A. K., Effect of Admixtures on Shrinkage Properties in Self Compacting Concrete –A Critical Review”, Proceedings of International Conference on Innovations in Structural Engineering, (IC-ISE-2015)”, Department of Civil Engineering, University College of Engineering (A), Osmania University, Hyderabad, India, 14-16 December 2015. pp 1508-1516, ISBN: 978-81-7371-986-8.
  7. Das C. K., and Banerjee S., Performance Based Fire Safety Design Criteria in Buildings, Proceedings of International Conference on Innovations in Structural Engineering, (IC-ISE-2015), Department of Civil Engineering, University College of Engineering (A), Osmania University, Hyderabad, India, 14-16 December 2015. pp 1680-1696, ISBN: 978-81-7371-986-8.

2014-15

  1. Chandra, S., Sugandha, S., Chand, S., Sahu, S.K., Manimaran, S. and Patro, S.K. Effect of bacteria on the properties of concrete using Portland slag cement. National Conference on Recent Advances and Future Prospects in Civil Engineering (RAFPCE-15). Centurion University, Bhubaneswar. 2015.
  2. Banerjee, S. and Patro, S.K. Park-Ang Damage Index Estimation of Buildings Built on Sloping Ground. 56th Annual Technical Session. The Institution of Engineers (India), Orissa State Centre, Bhubaneswar. 2015.
  3. Banerjee, S., Patro, S.K., and Rao, P. Inelastic Seismic Analysis of Reinforced Concrete frame building with soft storey. 2nd International Conference on Sustainable Innovative Techniques In Civil and Environmental Engineering-2nd SITCEE 2014. JNU, New Delhi. Jan 4-5, 2014.
  4. Patro, S. K. and Banerjee, S. . Structural economics of seismic resistant RC building with floating column. 55th Annual Technical Session. The Institution of Engineers (India), Orissa State Centre, Bhubaneswar. 2014.
  5. Agrawal, A., Nayak, G.P., Kumar, A., Mohanty, T. and Patro, S.K. . Replacement of sand with quarry dust in concrete. All India seminar on Advances in construction technology. The Institution of Engineers (India), Civil Engineering Division, Odisha State Centre, pp.96-101. February 9-10, 2014.
  6. Mohapatra, B.G. An investigation on failures in raft foundation due to uplift. All India Seminar on Advances in Construction Technology. Institution of Engineers, Bhubaneswar. 9th -10th February, 2014.
  7. Chaitanya, C., Saha, D., Manna, R. and Mohapatra, B.G. Importance of dewatering scheme in deep excavation. All India seminar on Advances in construction technology. The Institution of Engineers (India), Civil Engineering Division, Odisha State Centre, pp.64-67. February 9-10, 2014.
  8. Sahoo, S. K. , Mohapatra, B.G. and Paikaray, B. An investigation on failures in raft foundation due to uplift. All India seminar on Advances in construction technology. The Institution of Engineers (India), Civil Engineering Division, Odisha State Centre, pp.80-85. February 9-10, 2014.
  9. Das, S. and Saha, P. Sustainable and Durable Mortar/Concrete using Geo-polymer. Proceedings of the 3rd World Conference on Applied Sciences, Engineering & Technology-WCSET 2014, Kathmandu, Nepal. 27-29 September 2014. ISBN 13: 978-81-930222-0-7.
  10. Majumder, S. K. and Saha, P. Biomimicry and its adaptations to solve complex problems in Civil engineering systems. Proceedings of the International Conference on Sustainable Civil Infrastructure -ICSCI 2014. The India Section of American Society of Civil Engineers (ASCEIS) Department of Civil Engineering, Indian Institute of Technology Hyderabad, Hyderabad, India. 17-18 October 2014.
  11. Dey, A. , Dev, D. and Saha, P. Use of copper slag as sustainable aggregate. Proceedings of the International Conference on Sustainable Civil Infrastructure -ICSCI 2014. The India Section of American Society of Civil Engineers (ASCEIS) and Department of Civil Engineering, Indian Institute of Technology Hyderabad, Hyderabad, India. 17-18 October 2014.
  12. Pani, A. K. Concrete blocks & beams in pavement for tippers & heavy earth moving machinaries in mining areas. All India seminar on advances in Construction Technology. The Institution of Engineers (India), Civil Engineering Division, Odisha State Centre, pp.64-67. February 9-10, 2014.
  13. Mohapatra, A.K., Bera, D. K., Das, S.K., and Rath, A.K. Geo-polymerised fly ash based concrete-Overview. All India seminar on Advances in construction technology. The Institution of Engineers (India), Civil Engineering Division, Odisha State Centre, pp.41-46. February 9-10, 2014.